• MULTIPLE COMBUSTION CHAMBER

• SLUDGE BURNER(with Tubolator)

• EJECTOR SYSTEM(Colling Air by the Primary Blower)

• SELF-CLEANING STRAINER FOR SLUDGE OIL

• SLUICE

• MILL PUMP

  1. MULTIPLE COMBUSTION CHAMBER

Designed with one primary combustion chamber and two after-burning chambers.

While the flue gas go through 2nd & 3rd chamber having a residence time of 2secs at 850℃ or 1sec. at 950℃, self secondary burning for un-combusted flue gases is accomplished to minimize harmful emission.

(Any gases not completely burned from primary chamber will be combusted definitively.)

top

  2. SLUDGE BURNER (with Tubolator)

ATLAS’s own designed compressed air atomizing type sludge burner.

DISTINGUISHED SLUDGE ATOMIZATION
The turborator helps get the best sludge atomizing condition.
Even the sludge contained approx. 50% of water can be burnt without flame failure.

Therefore, the evaporating in sludge tank is not required.
The sludge tank comes to be simple and it’s cost is low. 

NON-BLOCKING
Nozzle hole size is ?8mm, bigger than the strainer’s hole size.
There is no blocking of sludge burner.

  3. EJECTOR SYSTEM (Cooling Air by the  Primary Blower)

By means of Ejector System ;
Negative pressure in combustion chamber additional
“Flue gas draft fan” is not necessary.

Shock cooling the flue gas to max. 350℃ to avoid formation of dioxins.

top

  4. SELF-CLEANING STRAINER FOR SLUDGE OIL

The pressurized sludge oil supplied from Mill pump go through 6mm strainer for burning and oversize particles are returned to sludge tank for shattring by Mill pump. 

There is no strainer blocking and maintenance and cleaning work is not required.

top

  5. SLUICE

Continuous and safety solid waste feeding system while Incinerator is burning. Operated automatically by two pneumatic air cylinder from a pushbutton switch.

top

  6. MILL PUMP

ATLAS’s own designed centrifugal pump with the impeller equipped with knives.
It works for comminuting of particles contained in sludge oil and effective agitation of sludge oil.